WILLIAMS PLT MFG MANUFACTURING ENGINEERING 1/31/92
DSP01 WORKCENTER INQUIRY WHERE-USED
900 MISCELLANEOUS WORKCENTER
Oper Oper
Part Number No Ln Operation Description L/T
FARING ASSEMB 010 01 FILE ANTENNA GUIDE 3
F2=Command F3=Exit F8=W/C Load F11=W/C Description
F16=W/C Capacity
This screen displays all routing steps performed in the requested miscellaneous cost workcenter. Both primary and alternate routings are displayed.
PLANT
Display only. The plant where the workcenter is located. It was specified on the Function Select screen.
WORKCENTER NUMBER
Display only. The workcenter for which information is being entered or changed. It was specified on the Function Select screen.
WORKCENTER DESCRIPTION
Display only. The workcenter description appears on various reports and inquiries and is used to describe the workcenter.
PART NUMBER
Display only. The part that is produced in the workcenter.
OPERATION/LINE NUMBER
Display only. The operation number serves as a unique identification of the step and defines the sequence in which steps are performed within the routing. A Line Number of '00' indicates a primary operation; a non-zero Line Number indicates an alternate operation. The Line Number is blank for JIT operation steps.
OPERATION DESCRIPTION
Display only. User defined.
OPERATION LEADTIME DAYS
Display only. Defines the number of days required to complete the operation.
COMMAND KEYS
Enter - Return to the Function Select screen.
F2 - Display a window where a fast path option or mnemonic can be entered. Fast path allows the next menu selection to be made directly from this screen. When the window is displayed, pressing
F3 will remove it.
F3 - Exit program and return to menu.
F8 - Used to enter the Function Select screen of the Load Summary Inquiry Program (available only if Capacity Planning is installed).
F11 - The Workcenter Inquiry Description screen is displayed.
F16 - Used to enter the Detail Screen of the Effective Capacity Inquiry Program (available only if Capacity Planning is installed).
|